How to solve the problem of poor cleaning effect of shot blasting machine?
The reasons for unsatisfactory cleaning effect of shot blasting machine are as follows:
- The supply of projectiles is insufficient and new projectiles should be added appropriately;
- The shot direction of the shot blaster is not accurate, and the window position of the directional sleeve of the shot blaster is adjusted;
- If the pellet size is not right, the pellet size should be re selected;
- If the pellets are caked or used for a long time, the pellets shall be replaced.
The solution to the low dust removal efficiency of the dust catcher of the shot blasting machine is introduced below.
- The connection of dust collector fan is wrong, the fan reverses and rewired;
- The filter cartridge in the dust collector is not installed firmly or damaged, or the filter cartridge is missing;
- The connection of dust removal pipeline is not well sealed to ensure the sealing of all parts;
- The cleaned workpiece does not fall sand as required, there is too much molding sand left, and the dust content of dust removal inlet air is too high;
- The back blowing mechanism of the dust remover is not used or used for a few times, and the dust blocks the filter cartridge, and the dust attached to the filter cartridge is removed in time.
If you have a better way, please leave a message. We will be very honored to discuss with you all the problems about shot blasting machine.